Everything you need to choose the right window tint for your BYD Atto 3, from prices and heat rejection to VLT guidance, panoramic-roof protection, installation and real owner reviews.
Ask for a Atto 3 quote
1st Gen (EV) generation. Factory rear-glass VLT estimate: 25%. The installer will confirm the actual glass layout before installation.
Malaysia's heat, glare, and cabin privacy needs vary by vehicle. The factory glass on this BYD Atto 3 has an estimated starting point in the model data, so a suitable film should be selected with VLT and the finished result in mind.
Quad Film compares the available film data, the 9-panel window layout, and your preferred balance of heat control, visibility, and privacy before installation. We confirm the final VLT with a meter reading rather than treating the database estimate as a promise.
These window tint recommendations cover the windscreen, side glass and rear glass. For the panoramic roof, we recommend EV sunroof PPF as the dedicated roof-protection option.
Compare the five Quad Film window tint series available for the BYD Atto 3. Each price is matched to this model’s vehicle size and glass layout. Your installer will confirm the selected shade and final VLT reading before installation.
Best Budget
RM 1,600
Best UV Protection
RM 2,200
Recommended
RM 2,600
Best for Night Driving
RM 3,400
Best Heat Rejection
RM 4,800
Prices shown are a guide and may vary after we inspect the vehicle and glass. Contact our team for the latest BYD Atto 3 price, current series availability, and a recommendation before booking.
The eight steps below are shown in the same order as the installation process. The work usually takes 2-5 hours, depending on the vehicle and selected series.
We inspect the BYD Atto 3 with you before installation. We check the glass, confirm the selected tint level, and take a VLT reading so the final result matches the agreed specification.
Protective covers are placed on the door panels and nearby trim before water or film is handled. This keeps the cabin and interior surfaces clean during the installation.
If the BYD Atto 3 already has window film, we remove the old film and adhesive first. This step is conditional: new vehicles without existing film move to the next preparation step.
The glass is cleaned through five preparation passes to remove dust, adhesive residue, oils, and other contamination. Clean glass gives the new film a clear, even surface to bond to.
The film is cut for the BYD Atto 3 window shape. Accurate cutting helps the installer align the film around the glass and trim without relying on a one-size-fits-all piece.
Controlled heat shapes the film to the curved glass on the BYD Atto 3. The installer works gradually so the film follows the window without unnecessary creases or stress.
The film is applied to the prepared glass of the BYD Atto 3. Squeegee passes remove the application solution and air pockets so the film settles evenly across the window.
We use torchlight inspection to check the installed film on the BYD Atto 3. The final check looks for dust, edges, bubbles, and other visible issues before the vehicle is handed back to you.
Read verified feedback from BYD Atto 3 owners who completed their window tint installation with Quad Film.
4.83 / 5
from 6+ customer reviews
Marcus F***** · Taman Equine
★★★★☆
Did MAGNETRON on my Atto 3 at Taman Equine and the heat difference is real, especially with 9 glass panels plus that big roof. CK Yong explained everything clearly. Only reason for 4 stars: nobody told me upfront how much heat comes through the panoramic roof, so I ended up adding the Sunroof PPF on a second visit and paying for two trips. Ask about the roof package on day one.
Jasmine O***** · Bangi
★★★★★
MIRACLE on the Atto 3. Kids stopped complaining about the sun. Kelvin Cheen's team was quick and careful.
Kenneth W***** · Sunway
★★★★★
Drive back from work always raining season at night one. Johnathan recommend METALUX, say the Night Vision Technology helps with glare on wet roads. True enough, oncoming headlights much softer now and my Atto 3 stays cool in the day also. RM3,400 can feel the quality lah.
Hafizah I***** · Taman Equine
★★★★★
Ambil MATRIX RM1,600 je dulu. CK Yong kata kalau rasa kurang boleh upgrade lain kali. Sekarang Atto 3 sejuk, bateri pun jimat sikit sebab aircond tak kuat sangat. Puas hati.
Farah D***** · Bangi
★★★★★
My Atto 3 used to blast the aircond on max just to survive the drive home. After MAGNETRON at RM2,600 from the Bangi branch, it actually breathes easier now and cools down in minutes. Kelvin Cheen was very honest about what each package does, no hard selling at all. The roof still gets warm but nothing like before.
Suresh P***** · Sunway
★★★★★
The panoramic roof was cooking my Atto 3. Johnathan Soh at Sunway showed me the numbers: untreated glass roofs hit 52°C in Quad's own EV test. I went with MEGALUX at RM4,800 plus the EV Sunroof PPF on the roof. Three weeks later, my daily commute uses noticeably less battery because the air-con barely works now, and the cabin is properly cool even after outdoor parking. Install ran about five hours with full documentation from pre-inspection to torchlight QC. Expensive, yes, but this is how the car should have come from the factory.
Tell us whether heat rejection, night visibility or privacy matters most. We will confirm the recommended series, latest price, VLT reading and installation slot.
Check latest pricePrefer to visit first? Find a Quad Film installer.
Search products, blog posts, and installer locations
