How do I clean the tinted windows on my Jetour T2?
Let the film cure for about a week before the first wash, then use a soft microfibre cloth with plain water or a mild ammonia-free glass cleaner. Skip abrasive sponges, blades and ammonia sprays because they scratch the film and dry out the adhesive. Wipe in one direction instead of hard circles, and wind the windows down slightly to reach the top edges. If your T2 sees dusty trails, rinse the glass before wiping. Treat it right and the film stays clear for the full warranty period.
Will tint affect the Smart Tag or RFID on my Jetour T2?
Both stay usable, with two small adjustments during install. Touch n Go RFID runs on UHF radio: it passes through non-metallic films like MATRIX and MIRACLE, and on metallic films like MEGALUX, METALUX or MAGNETRON we fit the sticker on the headlamp. SmartTAG is infrared, and every heat-rejecting film blocks part of that signal by design, so we leave a small untinted patch on the windscreen at the reader zone. T2 owners run this setup through tolls daily without missed reads.
How long does it take to install window tint on a Jetour T2?
A full tint installation on your T2 typically takes about 2 to 5 hours. Actual timing varies with the number of glass panels, windscreen curvature, the film series chosen, whether old tint needs steaming off, and current workshop queue and manpower availability. Multi-layer sputtered films like MEGALUX need more controlled heat-shrinking time. We confirm your exact time slot when you book.
What is the best VLT for a Jetour T2 to pass JPJ and Puspakom?
Your T2's front glass measures about 73% VLT from the factory. JPJ requires 70% final VLT on the windscreen and 50% on the front side windows, so a VLT 70 film on the front sides lands around 51%, comfortably legal. The rear glass measures about 25% VLT with no legal limit, so darker shades at the back are fine. All five Quad Film series come in VLT 70 for a compliant front setup.
Worth being straight about the windscreen: with factory glass in the mix, even VLT 70 film lands in the low 50s on a meter, which means no real heat-rejecting film passes the strict 70% windscreen rule on paper. Most owners still tint it because it reads visually clear at roadblocks. If you prefer zero risk, we can leave the windscreen clear or use a virtually clear safety film, and we will meter your actual glass for free before you decide.
How much does it cost to tint a Jetour T2 in Malaysia?
A full car Quad Film tint for the Jetour T2 starts at RM1,600 for MATRIX nano-ceramic and goes up to RM4,800 for the flagship MEGALUX. In between sit MIRACLE at RM2,200, MAGNETRON at RM2,600 and METALUX at RM3,400. The T2 falls in the Large bucket for its SUV glass area. All prices are full car with the windscreen included, and every package comes with a written warranty card.
Is dark tint on a Jetour T2 safe for night driving?
Yes, with the right setup. Keep the front at VLT 70, the T2's JPJ-compliant shade, and night visibility stays clear. For drivers sensitive to glare, METALUX uses Night Vision Technology for better visibility in the dark, even with astigmatism. Use the darker VLT 20 or VLT 5 shades on the rear glass only, where there is no legal limit.
Does Quad Film tint fade or turn purple on a Jetour T2?
No. Purple, bubbling windows come from cheap dyed film whose colour layer breaks down under Malaysian UV, and an adventure SUV that lives outdoors shows it fastest. Quad Film's sputtered and nano-ceramic films get their performance from metal and ceramic layers instead of dye, so colour and adhesion stay stable for years. MAGNETRON uses superior adhesives specifically to prevent bubbling after long sun exposure. Warranty runs 5 to 15 years by series, and colour stability is covered.
Which Quad Film package is best for a Jetour T2?
The T2 runs 9 glass panels in a tall, boxy glasshouse plus a panoramic roof, so it carries a serious solar load. For maximum rejection across every panel, MEGALUX at RM4,800 reaches 85% TSER at VLT 5 with a 15-year warranty, and we suggest pairing it with Quad Film EV Sunroof PPF on the roof, which reflects 95% of heat. Our smart value pick is MAGNETRON at RM2,600 with TSER up to 79% at VLT 5 and 99% IRR. On a tighter budget, MATRIX at RM1,600 still delivers 99% IRR.
Is the Jetour T2's boxy glasshouse a heat problem in Malaysia?
The tall, upright glass is exactly what makes the T2 look tough, and exactly what lets the afternoon sun pour in. The panoramic roof adds to it from above. In Quad's own testing, an untreated glass-roof cabin reached 52°C. The fix is a proper heat-rejecting film on all 9 panels, plus a roof treatment like the EV Sunroof PPF that reflects 95% of heat and brings the cabin from 52°C down to 22°C. Your ventilated seats finally get to work with the aircond instead of against the sun.
Will tinting my Jetour T2 affect my Jetour warranty?
No. Window film is applied to glass and does not touch the engine, drivetrain or electronics, so your Jetour manufacturer warranty stays intact. The same applies to the i-DM plug-in hybrid variants, since the film never goes near the battery. What manufacturers will not cover is installer damage, like scratched glass or water in the door switches, which is why our 8-step process includes door panel protection and a pre-inspection report you can keep on file.