为 BYD Seal 选择隔热膜所需的资讯：从价格和隔热表现，到 VLT 指引、全景天窗保护、安装及真实车主评价。
索取 Seal 报价
第一 (EV) 代车型。原厂后部玻璃 VLT 估计为 25%。安装前由师傅确认实际玻璃布局。
在马来西亚，不同车辆的热量、眩光及隐私需要各有不同。选择膜前先测量 BYD Seal 的原厂玻璃，再按驾驶视线与隐私需要选 VLT。
我们比较膜的性能及 7 块 玻璃布局，并考虑你的隔热、视线与隐私优先次序。安装后以仪表检查玻璃与膜的组合 VLT。
此车型的隔热膜建议涵盖前挡风玻璃、侧窗及后挡风玻璃。全景天窗则可另选EV Sunroof PPF，作为专门的玻璃车顶保护方案。
比较五款 QUAD Film 汽车隔热膜系列，适用于 BYD Seal。各价格按车型尺寸和玻璃布局配对。先测量原厂玻璃再选深浅，安装后由师傅确认组合 VLT。
隔热膜选择
RM 1,400
隔热膜选择
RM 2,000
推荐
RM 2,500
隔热膜选择
RM 3,200
隔热膜选择
RM 4,600
显示价格仅供参考，检查车辆和玻璃后可能调整。 联系我们 ，查询 BYD Seal 最新价格、系列供应及预约前建议。
以下八步按施工次序排列。通常需要 2 至 5 小时，视车辆及所选系列而定。
施工前与你一起检查 BYD Seal，先测量原厂玻璃再选膜。安装后检查组合 VLT，确认结果符合约定规格。
处理水和膜前，先保护门板及附近饰件，让车内表面在施工期间保持洁净。
如果 BYD Seal 已有膜，先拆除旧膜和残胶。此步骤按需要进行；没有旧膜的新车直接进入下一项准备。
经过五道清洁，去除灰尘、残胶、油污及其他污染物。干净玻璃让新膜均匀贴合。
按 BYD Seal 的玻璃形状裁膜，让师傅准确对齐玻璃和饰件，而非所有车辆都用同一尺寸。
以受控热量将膜塑形成 BYD Seal 的曲面玻璃。师傅逐步操作，避免不必要的褶皱与拉扯。
在已处理的 BYD Seal 玻璃上贴膜，以刮板排出施工液和空气，让膜均匀贴合。
以灯光检查 BYD Seal 已安装的膜，交车前查看灰尘、边缘、气泡及其他可见问题。
阅读在 Quad Film 完成安装的 BYD Seal 已核实车主评价。
4.83 / 5
来自 6+ 条客户评价
Firdaus J***** · Taman Equine
★★★★☆
MATRIX at RM1,400 on my Seal and honestly it performs way above its price, 99% IRR is 99% IRR. CK Yong's workmanship is clean, no dust, no bubbles. Only thing: Saturday at Taman Equine is packed, so my morning booking started nearly an hour late. Weekday visit next time for me. Tint itself, no complaints at all.
Grace H***** · Bangi
★★★★★
MAGNETRON on my Seal. Kelvin Cheen's team at Bangi, in and out in one afternoon. Impressed.
Adrian C***** · Sunway
★★★★★
Always balik kampung at night on the NKVE, so glare from lorry headlights was my biggest headache. Johnathan say METALUX got Night Vision Technology, so I try lor. Walau, first night drive already feel the difference, eyes not so tired. Seal cabin also much cooler in the day. RM3,200 well spent.
Rina W***** · Taman Equine
★★★★★
Padu gila MIRACLE ni. Seal saya sejuk sekarang, CK Yong pun explain elok-elok pasal UV 100%. RM2,000 sangat berbaloi.
Hakim B***** · Bangi
★★★★★
I expected tinting a premium EV to cost a bomb, but Kelvin Cheen at Bangi put me on MAGNETRON at RM2,500 and explained exactly why it was the right middle ground for the Seal. Heat rejection is excellent, the roof no longer radiates onto my head at noon, and the whole job was done in about four hours. Premium car, fair price, no complaints.
Vincent C***** · Sunway
★★★★★
A car at this price point deserves proper film, not dyed plastic. Johnathan Soh at Sunway put together a full proposal for my Seal: MEGALUX at RM4,600 for the cabin glass, plus the EV Sunroof PPF for the panoramic roof after showing me their 52°C test data. The whole job took just over five hours including the roof, with a documented pre-inspection and torchlight QC at the end. Two weeks on, the cabin holds its cool noticeably longer and the 15-year warranty gives me peace of mind. This is what a premium install should feel like.
搜索产品、文章与安装中心
