Perodua Bezza Window Tint

Everything you need to choose the right window tint for your Perodua Bezza, from prices and heat rejection to VLT guidance, installation and real owner reviews.

Ask for a Bezza quote
Perodua Bezza after Quad Film window tint installation
Perodua Bezza installation reference from the Quad Film workshop.
Vehicle type
Sedan
Window panels
6 panels
Front film estimate
69% VLT or lighter
Install time
2-5 hours

D63D 2nd Gen Facelift generation. Factory rear-glass VLT estimate: 73%. The installer will confirm the actual glass layout before installation.

Choosing window tint for the Bezza’s 6-panel glass layout

Malaysia's heat, glare, and cabin privacy needs vary by vehicle. The factory glass on this Perodua Bezza has an estimated starting point in the model data, so a suitable film should be selected with VLT and the finished result in mind.

Quad Film compares the available film data, the 6-panel window layout, and your preferred balance of heat control, visibility, and privacy before installation. We confirm the final VLT with a meter reading rather than treating the database estimate as a promise.

Heat rejection and daytime glare
Film performance is compared using the product's recorded TSER, IRR, and VLT values.
Cabin privacy and night visibility
Choose a shade that supports your driving view and the privacy you want when the vehicle is parked.

Perodua Bezza window tint series and prices

Compare the five Quad Film window tint series available for the Perodua Bezza. Each price is matched to this model’s vehicle size and glass layout. Your installer will confirm the selected shade and final VLT reading before installation.

Prices shown are a guide and may vary after we inspect the vehicle and glass. Contact our team for the latest Perodua Bezza price, current series availability, and a recommendation before booking.

How we install window tint on a Perodua Bezza

The eight steps below are shown in the same order as the installation process. The work usually takes 2-5 hours, depending on the vehicle and selected series.

  1. Glass Inspection and VLT Check

    We inspect the Perodua Bezza with you before installation. We check the glass, confirm the selected tint level, and take a VLT reading so the final result matches the agreed specification.

    Glass Inspection and VLT Check during window tint installation on Perodua Bezza
  2. Door Panel Protection

    Protective covers are placed on the door panels and nearby trim before water or film is handled. This keeps the cabin and interior surfaces clean during the installation.

    Door Panel Protection during window tint installation on Perodua Bezza
  3. Old Tint Removal

    If the Perodua Bezza already has window film, we remove the old film and adhesive first. This step is conditional: new vehicles without existing film move to the next preparation step.

    Old Tint Removal during window tint installation on Perodua Bezza
  4. Five-Stage Glass Cleaning

    The glass is cleaned through five preparation passes to remove dust, adhesive residue, oils, and other contamination. Clean glass gives the new film a clear, even surface to bond to.

    Five-Stage Glass Cleaning during window tint installation on Perodua Bezza
  5. Precision Film Cutting

    The film is cut for the Perodua Bezza window shape. Accurate cutting helps the installer align the film around the glass and trim without relying on a one-size-fits-all piece.

    Precision Film Cutting during window tint installation on Perodua Bezza
  6. Controlled Heat Shrinking

    Controlled heat shapes the film to the curved glass on the Perodua Bezza. The installer works gradually so the film follows the window without unnecessary creases or stress.

    Controlled Heat Shrinking during window tint installation on Perodua Bezza
  7. Film Application and Water Removal

    The film is applied to the prepared glass of the Perodua Bezza. Squeegee passes remove the application solution and air pockets so the film settles evenly across the window.

    Film Application and Water Removal during window tint installation on Perodua Bezza
  8. Final Torchlight Quality Check

    We use torchlight inspection to check the installed film on the Perodua Bezza. The final check looks for dust, edges, bubbles, and other visible issues before the vehicle is handed back to you.

    Final Torchlight Quality Check during window tint installation on Perodua Bezza

What Perodua Bezza owners say about their window tint installation at Quad Film

Read verified feedback from Perodua Bezza owners who completed their window tint installation with Quad Film.

4.85 / 5

from 20+ customer reviews

Panaskan enjin, bukan kabin

Khairul B***** · Taman Equine

★★★★★

Kerja saya banyak drive tengah hari, Bezza ni memang jadi sauna dulu. Lepas Taman Equine pasangkan MEGALUX, beza dia ketara sangat, TSER 72% pada VLT 70 depan dan 85% kat belakang VLT 5. Harga RM4,600 tinggi sikit tapi dengan warranty 15 tahun saya kira jimat untuk jangka panjang. Puas hati.

Full Car Tint Verified customer

Old Bezza feels new

Choon Hock N***** · Bangi

★★★★★

My Bezza is 8 years old and the interior was fading badly from sun damage. Did full car MIRACLE at Bangi for the 100% UV protection to save the dashboard. RM2,000, 7-year warranty, job done in one afternoon. Cabin feels cooler and the car finally looks tidy again outside.

Full Car Tint Verified customer

Anak tak meragam dah

Rozita M***** · Taman Equine

★★★★★

Bezza kami jadi kereta hantar anak sekolah tiap-tiap hari. Sebelum ni anak mengadu panas kat seat belakang. Lepas pasang MAGNETRON kat Taman Equine, belakang VLT 20, memang sejuk dan dia suka privacy gelap sikit. Saya suka sebab depan masih cerah dan sah JPJ. Terbaik.

Full Car Tint Verified customer

Second car tinted here

Kah Weng G***** · Sunway

★★★★★

This is the second car I've done at Sunway, this time my wife's Bezza with MAGNETRON. Same consistent quality: plotter-cut edges, no dust trapped, water fully out. Collection was on time and Johnathan Soh walked us through the warranty card properly. Both our cars are now Quad Film cars.

Full Car Tint Verified customer

Front sides redone after JPJ worry

Yee Ling C***** · Bangi

★★★★★

My Bezza came with very dark front side tint from the previous owner and I got worried after reading about JPJ checks. Bangi replaced both front sides with MAGNETRON VLT 70, final reading about 51% so fully legal. Fast job, fair price, and they gave me a VLT reading printout for peace of mind.

Front Side Windows Verified customer

Tinta padu, harga berpatutan

Firdaus J***** · Taman Equine

★★★★★

Bezza 2017 saya dah lama tinted pudar. Taman Equine buang tinted lama, pasang MATRIX baru full car RM1,400. Nampak fresh terus dan panas kurang banyak. CK Yong bagitahu kalau jaga basuh betul-betul tahan 5 tahun. Untuk harga macam ni, memang takkan cari kedai lain dah.

Full Car Tint Verified customer

Expat approved tint job

Rachel V***** · Sunway

★★★★★

Moved to KL last year and the heat in my Bezza was brutal. Sunway branch sorted me out with METALUX full car. The night clarity is genuinely excellent, which matters because I drive a lot after work. RM3,200 with a 10-year warranty. Service was very organized, they even did a walkaround inspection with me before starting.

Full Car Tint Verified customer

Smart Tag patch done properly

Jian Wei O***** · Bangi

★★★★★

Was worried about my Smart Tag after tinting because I use the NKVE daily. Bangi team left a small clean patch on the windscreen for the Smart Tag unit and moved my RFID sticker to the headlamp. Three weeks of tolls, zero missed reads. Bezza stays cool, tolls stay smooth. MAGNETRON RM2,500 well spent.

Full Car Tint Verified customer

Bezza makin selesa

Hafizah R***** · Taman Equine

★★★★★

Dah dua bulan pakai MAGNETRON full car dari Taman Equine. Bezza saya parking bawah matahari hari-hari kat tapak pembinaan, dulu masuk kereta memang sakit tangan pegang steering. Sekarang jauh beza, aircond cepat sejuk. Depan 70% VLT, belakang gelap sikit untuk privacy. Memang recommend.

Full Car Tint Verified customer

Front windscreen only, big difference

Hui Min W***** · Sunway

★★★★★

Did just the front windscreen on my Bezza with MIRACLE VLT 70 at Sunway. My commute faces the evening sun and the dash used to be burning hot. Now it's noticeably better, and the film has 100% UV rejection which matters to me for skin. Johnathan Soh's team was quick and professional.

Front Windscreen Verified customer

MATRIX budget but not cheap feeling

Wai Kin P***** · Bangi

★★★★★

As a fresh grad, RM1,400 MATRIX full car for my Bezza was the max I could spend. Honestly impressed: 99% IRR, cabin way less stuffy, and it looks clean. Bangi branch didn't push me to upgrade at all. Kelvin Cheen just explained the options and let me decide. Five stars for no hard selling.

Full Car Tint Verified customer

Rear screen akhirnya settle

Azimah Y***** · Taman Equine

★★★★★

Rear windscreen Bezza saya bubble teruk sebab tinted murah. Pergi Taman Equine, dorang steam off lepas tu pasang MIRACLE VLT 20 kat belakang. Sekarang nampak bersih dan gelap cantik, privacy pun ada. Terima kasih CK Yong sebab explain sabar je dengan saya.

Rear Windscreen Verified customer

Quality costs a bit more

Andrew T***** · Sunway

★★★★☆

Took the Bezza to Sunway for MEGALUX. Cannot deny the quality, heat rejection is immediately obvious on the PLUS highway. My only gripe is the RM4,600 price tag, which is double what my previous shop charged. But that one bubbled in 18 months, so maybe you really get what you pay for. The 15-year warranty helps justify it.

Full Car Tint Verified customer

Nice work, prep takes time

Siew Lee N***** · Bangi

★★★★☆

Full car MAGNETRON on my Bezza at Bangi. Result is great, cabin much cooler and edges are tidy. Just be prepared to leave the car most of the day, they steamed off my old tint and did proper triple cleaning so it took longer than I expected. At least they did not rush it.

Full Car Tint Verified customer

MEGALUX berbaloi untuk Bezza

Shahrul N***** · Taman Equine

★★★★★

Saya ambil MEGALUX untuk Bezza 1.0 saya di Taman Equine. Memang mahal sikit RM4,600 tapi warranty 15 tahun dan TSER 72% pada VLT 70 untuk cermin depan. Anak-anak kat belakang tak mengeluh panas dah bila balik kampung. CK Yong dan team buat kerja sangat kemas.

Full Car Tint Verified customer

From bubbling mess to clean finish

Pei Shan L***** · Sunway

★★★★★

My 2019 Bezza had the usual rear screen bubble problem from a RM300 tinted. The Sunway team steamed everything off, cleaned properly and installed MAGNETRON. Three months in, zero bubbles and the heat rejection is on another level. Should have done this from day one.

Full Car Tint Verified customer

Good tint, but book early

Nurfarah S***** · Taman Equine

★★★★☆

Bezza saya siap full car MIRACLE kat Taman Equine. Hasilnya memang cantik, takde bubble, tepi kemas. Cuma kena book hampir dua minggu awal sebab branch ni memang penuh. Harga RM2,000 untuk 7 tahun warranty okay lah. Kereta sekarang jauh lebih sejuk.

Full Car Tint Verified customer

Front windscreen and sides done right

Kok Leong C***** · Bangi

★★★★★

Bangi branch did my Bezza front windscreen and front sides in METALUX VLT 70. Kelvin Cheen warned me my old rear tint was cheap dyed film and showed me the bubbles starting. Front now crystal clear at night, no haze at all. Will come back for the rear soon.

Front Windscreen, Front Side Windows Verified customer

MAGNETRON on my Bezza, no regrets

Jia Hao C***** · Sunway

★★★★★

Did my Bezza at the Sunway branch with Johnathan Soh. He measured my factory glass first and explained the final VLT math clearly, front ended up around 51% which is JPJ safe. Cabin cools down noticeably faster on my daily USJ to KL commute. RM2,500 for MAGNETRON with 8 years warranty feels fair.

Full Car Tint Verified customer

Bezza sejuk terus lepas tint

Ridwan S***** · Taman Equine

★★★★★

Hantar Bezza saya kat Quad Film Taman Equine bulan lepas, ambil pakej MAGNETRON full car. CK Yong explain semua VLT ikut JPJ, depan pakai 70% so takde masalah Puspakom. Sekarang parking luar ofis pun masuk kereta tak rasa macam oven dah. Berbaloi sangat untuk harga RM2,500.

Full Car Tint Verified customer

Frequently asked questions about Bezza window tint

Why does the rear windscreen tint on my Perodua Bezza keep bubbling?
This is the most common Bezza tint complaint we hear, and it almost always traces back to cheap dyed film with weak adhesive. The rear screen sits nearly flat under direct sun, the glue cooks, and bubbles plus purple patches appear within a year or two. Quad Film uses sputtered and nano-ceramic construction with high-stability adhesives that resist exactly this failure. If your Bezza already has bubbling film, we steam it off completely before the new tint goes on.
How much does it cost to tint a Perodua Bezza in Malaysia?
For a Perodua Bezza, Quad Film full car tinting starts at RM1,400 for the MATRIX nano-ceramic package and goes up to RM4,600 for the flagship MEGALUX. In between sit MIRACLE at RM2,000, MAGNETRON at RM2,500 and METALUX at RM3,200, all full car with the windscreen included. Most Bezza owners at our KL branches end up with MAGNETRON because it balances heat rejection and price for daily town driving. If budget is the main concern, MATRIX at RM1,400 still beats any dyed promo film on heat and UV.
How do I clean the tinted windows on my Perodua Bezza?
Let the film cure for about a week before the first clean, then use a soft microfibre cloth with plain water or a mild ammonia-free glass cleaner. Skip abrasive sponges, blades and ammonia sprays because they scratch the film and dry out the adhesive. Wipe in one direction rather than hard circles, and wind the windows down slightly to reach the top edges. Treat the film this way and it should stay clear for the whole warranty period.
What is the best VLT for a Perodua Bezza to pass JPJ and Puspakom?
Your Bezza's front glass measures about 73% VLT from the factory. JPJ requires at least 70% final VLT on the windscreen and 50% on the front side windows, so a VLT 70 film on the front sides lands you at roughly 51% and you pass with margin. The rear windows and rear windscreen have no legal limit, so you can go as dark as VLT 5 at the back. Every Quad Film series is available in VLT 70, so any package you pick can be configured to pass. Worth being straight about the windscreen: with factory glass in the mix, even VLT 70 film lands in the low 50s on a meter, which means no real heat-rejecting film passes the strict 70% windscreen rule on paper. Most owners still tint it because it reads visually clear at roadblocks. If you prefer zero risk, we can leave the windscreen clear or use a virtually clear safety film, and we will meter your actual glass for free before you decide.
My Perodua Bezza AV already has factory solar film. Do I still need to tint?
The Bezza Premium X and AV come with Perodua's Solar and Security Window Film, which is a decent safety layer but modest on heat rejection. Many AV owners still tell us the cabin feels like an oven after lunch-hour parking. Adding a proper heat film such as MAGNETRON (66% TSER at VLT 70) on top makes a difference you can feel immediately. We meter your factory glass first so the final VLT stays JPJ-compliant on the front windows.
Does Quad Film tint fade or turn purple on a Perodua Bezza?
No. Purple windows are the trademark of cheap dyed film breaking down under UV exposure. Quad Film's sputtered and nano-ceramic films get their performance from metal and ceramic layers instead of dye, so the colour stays stable for years in our climate. MIRACLE even adds Fade Proof Technology on top. Every series is covered for 5 to 15 years depending on which you choose, and colour stability is part of that warranty.
Will tinting void my Perodua Bezza manufacturer warranty?
No. Window film sits on the glass and does not touch the engine, gearbox or electronics, so your Perodua warranty stays intact. What manufacturers will not cover is damage from a careless installer, like scratched glass or water in the door switches. That is why every Bezza we tint goes through door panel protection and a pre-inspection with you before work starts. The film itself carries its own warranty of 5 to 15 years depending on the series.
Which Quad Film package is best for a Perodua Bezza?
The Bezza has 6 glass panels in a standard sedan layout, so you do not need the most extreme film to feel a real difference. For performance per ringgit, MAGNETRON at RM2,500 is our smart pick, with TSER up to 79% at VLT 5 and 99% IRR. If you want maximum heat rejection and the longest coverage, MEGALUX at RM4,600 gives 85% TSER at VLT 5 and a 15-year warranty. On a tighter budget, MATRIX at RM1,400 still outperforms any dyed film on the market.
Will tinting affect the Smart Tag or RFID on my Perodua Bezza?
It depends on the film, and we plan around it during installation. Touch n Go RFID runs on UHF radio, so the non-metallic MATRIX and MIRACLE films let the signal pass, while metallic sputtered films like MEGALUX, METALUX and MAGNETRON can weaken it, in which case we mount the RFID sticker on the headlamp. SmartTAG runs on infrared, which every heat-rejecting film partially blocks by design, so we leave a small untinted patch on the windscreen in front of the SmartTAG unit. That is the standard industry practice and your toll trips stay normal.
How long does it take to install window tint on a Perodua Bezza?
A full tint installation on your Bezza typically takes about 2 to 5 hours. Actual timing varies with the number of glass panels, windscreen curvature, the film series chosen, whether old tint needs steaming off, and current workshop queue and manpower availability. Multi-layer sputtered films like MEGALUX need more controlled heat-shrinking time, especially on the rear screen. We confirm your exact time slot when you book.
Is a RM300 full car tint worth it for a Perodua Bezza?
Short answer, no. At RM300 you are getting dyed film with no real heat rejection, and that is exactly the film behind the bubbling rear screens you see on so many Bezzas around town. You will pay again to strip and redo it within two years, so the cheap route costs more in the end. Quad Film's entry MATRIX package at RM1,400 already gives you nano-ceramic construction, 99% IRR, 99% UV rejection and a 5-year warranty.
Is dark tint on a Perodua Bezza safe for night driving?
It is, as long as the film has high optical clarity. Cheap dyed films turn hazy and yellowish at night, which is where the danger comes from. If you drive a lot at night, METALUX is tuned for optical clarity and suits drivers with astigmatism, with 97% IRR and a 10-year warranty. A sensible Bezza setup is VLT 70 in front for JPJ compliance and VLT 30 or VLT 20 at the rear for privacy without straining your eyes.

Get a Perodua Bezza tint recommendation

Tell us whether heat rejection, night visibility or privacy matters most. We will confirm the recommended series, latest price, VLT reading and installation slot.

Check latest price

Prefer to visit first? Find a Quad Film installer.

Perodua Bezza handover after Quad Film window tint installation
Perodua Bezza handover after installation.
Ask for a Bezza quote

Search QUAD Film

Search products, blog posts, and installer locations