Everything you need to choose the right window tint for your Perodua Myvi, from prices and heat rejection to VLT guidance, installation and real owner reviews.
Perodua Myvi installation reference from the Quad Film workshop.
Vehicle type
Hatchback
Window panels
6 panels
Front film estimate
69% VLT or lighter
Install time
2-5 hours
D20N 3rd Gen generation. Factory rear-glass VLT estimate: 73%. The installer will confirm the actual glass layout before installation.
Choosing window tint for the Myvi’s 6-panel glass layout
Malaysia's heat, glare, and cabin privacy needs vary by vehicle. The factory glass on this Perodua Myvi has an estimated starting point in the model data, so a suitable film should be selected with VLT and the finished result in mind.
Quad Film compares the available film data, the 6-panel window layout, and your preferred balance of heat control, visibility, and privacy before installation. We confirm the final VLT with a meter reading rather than treating the database estimate as a promise.
Heat rejection and daytime glare
Film performance is compared using the product's recorded TSER, IRR, and VLT values.
Cabin privacy and night visibility
Choose a shade that supports your driving view and the privacy you want when the vehicle is parked.
Perodua Myvi window tint series and prices
Compare the five Quad Film window tint series available for the Perodua Myvi. Each price is matched to this model’s vehicle size and glass layout. Your installer will confirm the selected shade and final VLT reading before installation.
Prices shown are a guide and may vary after we inspect the vehicle and glass. Contact our team for the latest Perodua Myvi price, current series availability, and a recommendation before booking.
How we install window tint on a Perodua Myvi
The eight steps below are shown in the same order as the installation process. The work usually takes 2-5 hours, depending on the vehicle and selected series.
1.Glass Inspection and VLT Check
We inspect the Perodua Myvi with you before installation. We check the glass, confirm the selected tint level, and take a VLT reading so the final result matches the agreed specification.
2.Door Panel Protection
Protective covers are placed on the door panels and nearby trim before water or film is handled. This keeps the cabin and interior surfaces clean during the installation.
3.Old Tint Removal
If the Perodua Myvi already has window film, we remove the old film and adhesive first. This step is conditional: new vehicles without existing film move to the next preparation step.
4.Five-Stage Glass Cleaning
The glass is cleaned through five preparation passes to remove dust, adhesive residue, oils, and other contamination. Clean glass gives the new film a clear, even surface to bond to.
5.Precision Film Cutting
The film is cut for the Perodua Myvi window shape. Accurate cutting helps the installer align the film around the glass and trim without relying on a one-size-fits-all piece.
6.Controlled Heat Shrinking
Controlled heat shapes the film to the curved glass on the Perodua Myvi. The installer works gradually so the film follows the window without unnecessary creases or stress.
7.Film Application and Water Removal
The film is applied to the prepared glass of the Perodua Myvi. Squeegee passes remove the application solution and air pockets so the film settles evenly across the window.
8.Final Torchlight Quality Check
We use torchlight inspection to check the installed film on the Perodua Myvi. The final check looks for dust, edges, bubbles, and other visible issues before the vehicle is handed back to you.
What Perodua Myvi owners say about their window tint installation at Quad Film
Read verified feedback from Perodua Myvi owners who completed their window tint installation with Quad Film.
4.85 / 5
from 20+ customer reviews
Hadapan terang, belakang gelap
Marlina S***** · Taman Equine
★★★★★
Saya suka setup Taman Equine buat untuk Myvi saya. MAGNETRON depan VLT 70 ikut undang-undang, belakang VLT 20 untuk privacy anak-anak. Dorang tunjuk bacaan meter sebelum dan selepas. Kerja kemas, harga berpatutan, servis mesra. Lima bintang.
Full Car TintVerified customer
Old tint gone, new tint solid
Chong Wei H***** · Bangi
★★★★★
My 2015 Myvi's tint was purple and peeling. Bangi removed everything, triple cleaned the glass, and installed MATRIX full car. Looks fresh, feels cooler, and RM1,400 didn't hurt. Kelvin Cheen said to come back for a free check anytime. Trust earned.
Full Car TintVerified customer
Balik kampung tak berpeluh
Yusoff D***** · Taman Equine
★★★★★
Raya tahun ni drive Myvi balik Kelantan lepas pasang MAGNETRON kat Taman Equine. Empat jam perjalanan, kabin sekejap je sejuk dan anak-anak tidur lena kat belakang. Depan VLT 70 jadi roadblock pun tak risau. RM2,500, warranty 8 tahun. Sangat recommended.
Full Car TintVerified customer
METALUX for late night drives
Jun Hao L***** · Sunway
★★★★★
I finish work near midnight most days, so I picked METALUX for my Myvi on Sunway's advice. Night clarity is excellent, no haze, no yellow tint like my old film. Daytime heat is much lower too. RM3,200 with a 10-year warranty. Solid choice for night drivers.
Full Car TintVerified customer
Front legal, rear dark, perfect
Pui San N***** · Bangi
★★★★★
Bangi set up my Myvi exactly how I wanted: MAGNETRON VLT 70 up front so it's JPJ safe, VLT 5 at the rear for privacy. They showed me the meter readings for both. Car looks sharp and stays cool. This is how tinting should be done.
Front Windscreen, Front Side WindowsVerified customer
Axia ke Myvi, dua-dua kat sini
Nizam J***** · Taman Equine
★★★★★
Dulu hantar Axia kat Taman Equine, sekarang Myvi baru pun sama. Ambil MATRIX RM1,400 untuk yang ni sebab kereta second. Kualiti sama kemas, cermin bersih takde habuk. Panas kurang banyak. CK Yong memang tak pernah mengecewakan.
Full Car TintVerified customer
Professional from booking to pickup
Nicole S***** · Sunway
★★★★★
Everything about Sunway was smooth: WhatsApp booking, clear pricing, pre-inspection walkaround, and an on-time pickup. My Myvi got MAGNETRON full car and the difference in afternoon heat is obvious. Johnathan Soh personally checked the edges before releasing the car. Impressed.
Full Car TintVerified customer
New Myvi, no factory tint, fixed
Jia Min C***** · Bangi
★★★★★
Took delivery of my Myvi 1.5 X and was surprised it came with no real heat film at all. Bangi did MAGNETRON full car within the week. They metered the glass, explained JPJ limits, front final VLT about 51%. The car finally feels complete. Money well spent.
Full Car TintVerified customer
Cermin belakang siap cantik
Salmah K***** · Taman Equine
★★★★★
Rear windscreen Myvi saya bubble dan pudar ungu, memang malu tengok. Taman Equine steam off lepas tu pasang MIRACLE VLT 20 kat belakang. Sekarang gelap dan kemas, anak-anak suka privacy. CK Yong bagitahu filem ni tahan 7 tahun. Puas hati sangat.
Rear WindscreenVerified customer
Toll reader still works perfectly
Li Wen G***** · Sunway
★★★★★
Was paranoid about my Myvi's built-in toll reader after reading the Facebook group horror stories. Sunway left a clean patch at the reader zone and it scans every single time. MAGNETRON full car, RM2,500. Cabin heat is way down and tolls are drama-free. Exactly what I asked for.
Full Car TintVerified customer
Great finish, slow prep
Kok Seng T***** · Bangi
★★★★☆
Full car MIRACLE on my old Myvi at Bangi. The result is beautiful, no bubbles and much cooler. Just know that removing my 6-year-old film took most of the morning, so the whole job ran long. Kelvin Cheen kept me updated. Quality is worth the wait.
Full Car TintVerified customer
Isteri tak mengeluh dah
Azreen M***** · Taman Equine
★★★★★
Myvi isteri saya panas teruk tiap petang bila dia jemput anak. Taman Equine pasang MAGNETRON full car, belakang VLT 20 untuk privacy. Sekarang dia senyap je, siap puji kereta sejuk. CK Yong explain semua dengan sabar. Servis memang top.
Full Car TintVerified customer
Excellent work, felt the price
Jason P***** · Sunway
★★★★☆
MEGALUX full car on the Myvi at Sunway. Honestly the heat rejection is superb and the 15-year warranty is the longest I've seen. Only reason for four stars is the RM4,600 bill, which stings on a hatchback budget. But you pay once and forget about tint for over a decade. Fair trade.
Full Car TintVerified customer
Second Myvi, same shop
Siew Mei L***** · Bangi
★★★★★
Bangi tinted my first Myvi back in 2022 and it never bubbled. New Myvi went straight back to them for MAGNETRON. Same careful work: pre-inspection, panel protection, torchlight check at the end. Consistency like this is rare. Five stars without hesitation.
Full Car TintVerified customer
MEGALUX untuk king of the road
Hisham R***** · Taman Equine
★★★★★
Myvi saya kereta harian, 60km sehari ulang-alik. Saya ambil MEGALUX sebab nak TSER tinggi dan warranty 15 tahun, RM4,600 sekali jalan. Taman Equine pasang kemas, depan VLT 70 sah JPJ. Sekarang waktu tengah hari pun steering tak panas membakar. Worth every sen.
Full Car TintVerified customer
Front windscreen MIRACLE, skin says thanks
Hui Ling T***** · Sunway
★★★★★
Did the front windscreen of my Myvi in MIRACLE VLT 70 at Sunway for the 100% UV rejection. My morning drive faces the sunrise and my arms used to tan unevenly, no joke. Problem solved. The film is crystal clear and the team walked me through the JPJ numbers honestly before installing. Two hours, done.
Front WindscreenVerified customer
Bagus, tapi kena book awal
Normala H***** · Taman Equine
★★★★☆
Myvi saya siap MIRACLE full car kat Taman Equine. Kerja kemas, takde bubble, cermin nampak bersih. Cuma booking penuh, saya tunggu lebih seminggu. Harga RM2,000 dengan warranty 7 tahun berbaloi. Sekarang kereta sejuk walaupun parking luar hospital seharian.
Full Car TintVerified customer
MATRIX full car, king stays cool
Weng Kit C***** · Bangi
★★★★★
RM1,400 MATRIX full car on my Myvi at Bangi. For the price I expected average results, but 99% IRR is no joke. Car cools down fast even after open parking at Pasar Bangi all morning. Kelvin Cheen was straight with me about what each package offers. Very satisfied.
Full Car TintVerified customer
AV factory tint upgraded properly
Kar Meng C***** · Sunway
★★★★★
My Myvi AV came with the factory security film but the cabin still baked every afternoon. Sunway metered the glass, explained the factory film is for safety not heat, and installed MAGNETRON on top. Total game changer on my daily crawl on the Federal. Johnathan Soh's team is meticulous.
Full Car TintVerified customer
Myvi baru terus ke Taman Equine
Azri T***** · Taman Equine
★★★★★
Myvi 1.5 H saya baru seminggu, terus hantar Taman Equine untuk MAGNETRON full car. CK Yong explain built-in toll reader saya guna infrared, jadi dorang tinggalkan patch kecil kat cermin untuk dia. Tiga bulan guna, toll tak pernah miss. Kereta pun sejuk gila. RM2,500 sangat berbaloi.
Full Car TintVerified customer
Frequently asked questions about Myvi window tint
What is the best VLT for a Perodua Myvi to pass JPJ and Puspakom?
Your Myvi's front glass measures about 73% VLT from the factory. JPJ wants 70% final VLT on the windscreen and 50% on the front side windows, so a VLT 70 film on the front sides gives you roughly 51%, safely legal. The rear glass has no legal limit, so VLT 20 or VLT 5 at the back is fine. All five Quad Film series come in VLT 70, so any package can be configured to pass.
One honest note on the windscreen: even a VLT 70 film reads in the low 50s once combined with factory glass, so no heat-rejecting film passes a strict JPJ meter test there on paper. In practice a VLT 70 windscreen reads visually clear at roadblocks, and most owners tint it. If you want zero risk on paper, we can leave the windscreen untinted or fit a virtually clear safety film, and we can meter your actual glass free before you decide.
How much does it cost to tint a Perodua Myvi in Malaysia?
A full car Quad Film tint for the Perodua Myvi starts at RM1,400 for MATRIX nano-ceramic and tops out at RM4,600 for the flagship MEGALUX. MIRACLE is RM2,000, MAGNETRON is RM2,500 and METALUX is RM3,200, all full car with the windscreen included. Most Myvi owners at our branches go with MAGNETRON for the balance of price and heat rejection. Every package includes a written warranty card.
Will tinting void my Perodua Myvi manufacturer warranty?
No. Window film is applied to glass and does not touch the engine, gearbox or electronics, so your Perodua coverage stays intact. What manufacturers will not cover is installer damage, like scratched glass or water in the door switches. That is why our 8-step process includes door panel protection and a pre-inspection with you. The film itself carries 5 to 15 years of warranty depending on the series.
How hot does a Perodua Myvi get when parked under the sun?
Very hot. In one local test, a dark-coloured Myvi's exterior hit 74.9°C after just one hour under the Malaysian sun, and the cabin of any car in that situation passes 60°C easily. The Myvi's 6 glass panels at about 73% factory VLT let most of that heat straight in. A good heat-rejecting film cuts cabin soak temperature dramatically, so your aircond stops fighting a losing battle every afternoon.
My Perodua Myvi AV already has factory security tint. Do I still need aftermarket tint?
The Myvi AV's factory security film is mainly about holding glass together, not rejecting heat. Many AV owners still complain the cabin heats up fast under our sun. Adding MAGNETRON (66% TSER at VLT 70) or MEGALUX on top changes that completely. We meter the factory glass first so the front windows stay JPJ-compliant after the new film goes on.
How long does it take to install window tint on a Perodua Myvi?
A full tint installation on your Myvi typically takes about 2 to 5 hours. Actual timing varies with the number of glass panels, windscreen curvature, the film series chosen, whether old tint needs steaming off, and current workshop queue and manpower availability. Multi-layer sputtered films like MEGALUX need more controlled heat-shrinking time. We confirm your exact time slot when you book.
Does Quad Film tint fade or turn purple on a Perodua Myvi?
No. Purple bubbling windows come from cheap dyed film whose colour layer breaks down under UV, and you see them on Myvis everywhere. Quad Film's sputtered and nano-ceramic films get their performance from metal and ceramic layers instead of dye, so the colour stays stable for years. MIRACLE adds Fade Proof Technology on top. Warranty runs 5 to 15 years by series, and colour stability is covered.
Which Quad Film package is best for a Perodua Myvi?
The Myvi has 6 glass panels in a compact hatchback body, so every package gives a clear improvement. Our smart value pick is MAGNETRON at RM2,500, a hybrid of 12-layer sputtering and nano-ceramic with TSER up to 79% at VLT 5 and 99% IRR. Budget tight? MATRIX at RM1,400 still gives 99% IRR and a 5-year warranty. Want maximum rejection? MEGALUX at RM4,600 reaches 85% TSER at VLT 5 with 15 years of coverage.
How do I clean the tinted windows on my Perodua Myvi?
Let the film cure for about a week before the first wash, then use a soft microfibre cloth with plain water or a mild ammonia-free glass cleaner. Skip abrasive sponges, blades and ammonia sprays because they scratch the film and dry out the adhesive. Wipe in one direction instead of hard circles, and wind the windows down slightly to reach the top edges. Treat it right and the film stays clear for the full warranty period.
Will tint affect the built-in Smart Tag reader on my Perodua Myvi?
This is a big question in the Myvi owner groups, and here is the honest answer. The built-in Touch n Go reader on 1.5 variants works on infrared, and every heat-rejecting film blocks some infrared by design. Our installers leave a small untinted patch on the windscreen right at the reader zone, which is the standard professional fix and keeps your toll scans normal. For the RFID sticker, non-metallic MATRIX and MIRACLE let the UHF signal through, while metallic films like MEGALUX, METALUX and MAGNETRON do better with the sticker on the headlamp.
Is dark tint on a Perodua Myvi safe for night driving?
Yes, as long as the film has high optical clarity. Cheap dyed films turn hazy and yellowish after dark, which is where night danger really comes from. If you drive a lot at night, METALUX is engineered for optical clarity and suits drivers with astigmatism, with 97% IRR and a 10-year warranty. A common Myvi setup is VLT 70 in front and VLT 30 or VLT 20 at the rear, privacy without the strain.
Where should the RFID sticker go on a tinted Perodua Myvi?
It depends on the film you choose. Touch n Go RFID uses UHF radio, which passes cleanly through the non-metallic MATRIX and MIRACLE films, so the sticker can stay on the windscreen. With metallic sputtered films like MEGALUX, METALUX and MAGNETRON, the metal layers can weaken the signal, so we mount the sticker on the headlamp instead. We confirm the placement with you during installation, so toll day stays boring.
Get a Perodua Myvi tint recommendation
Tell us whether heat rejection, night visibility or privacy matters most. We will confirm the recommended series, latest price, VLT reading and installation slot.